Citizen CT-E301 Mode D'emploi page 55

7. Press the FEED button for at least two seconds.
The changed memory switch settings are saved and a list of them is printed.
The printer exits quick setting mode when printing is finished.
Selected item
Manufacturer
CITIZEN
CT-S310
EPSON
T88
EPSON
Individual setting mode
Set the memory switches individually.
Do the settings while confirming the memory switch function and settings on the print-
out.
1. Load paper.
2. While the paper cover is open, press and hold the FEED button and turn on the power.
3. Press the FEED button twice and close the paper cover.
The printer enters the mode for setting memory switches individually.
The printer prints "Memory SW (1)" and the current setting, 0 (off) or 1 (on).
(The current settings for memory switches 7 to 13 are not printed.)
4. Press the FEED button.
Each press of the FEED button cycles through the list of memory switches in the following se-
quence: "Memory SW (1)" > "Memory SW (2)" > ..."Memory SW (11)" or "Memory SW (13)" >
"Save To Memory" > "Memory SW (1)".
Press the FEED button until the number for the memory switch you want to change is printed.
Paper Character
width space
58 mm -
80 mm -
0 dot
58 mm
1 dot
0 dot
80 mm
1 dot
80 mm -
58 mm -
Current memory switch
Automatic memory switch settings
MSW2-4
Full Col
Print
WaitData
WaitData
WaitData
WaitData
WaitData
WaitData
WaitData
WaitData
Current setting
– 55 –
MSW3-7
MSW8-1
CBM1000
Print Width
Mode
Invalid 384 dots
Invalid 576 dots
Invalid 360 dots
Invalid 390 dots
Invalid 512 dots
Invalid 546 dots
Invalid 576 dots
Invalid 420 dots
MSW6-2
Character
Space
-
-
0 dot
1 dot
0 dot
1 dot
0 dot
-