1. Safety instructions
The haacon spindle support device S 2000 Plus is designed for
mounting on a trailer vehicle.
It is not a device suitable for operating on its own.
It must not be brought into circulation until it has been
established that the trailer vehicle with the support device
complies with the national regulations for road traffic.
The support device may only be operated in conjunction with
the operating manuals of the tractor and trailer vehicles and the
one supplied with the support device.
The safety regulations set out in the appropriate points in the
operating manual must be observed for operating, servicing,
installing and repairing the support device. The safety
regulations for the tractor and trailer vehicle are also valid.
After its careful installation check the function of the support
device.
If it is not used for the purpose for which it is designed, the
support device may constitute considerable potential danger.
Observe the regulations for road traffic and the accident
prevention regulations issued by the professional associations,
in particular
l The operating manual for the tractor vehicle
l The operating manual for the trailer vehicle
l VBG 8 "Accident Prevention Regulations for Winches,
Lifting and Towing Equipment"
l VBG 12 "Accident Prevention Regulations for Motor Vehicles"
l VBG 36 "Industrial Trucks"
l BG regulations "Motor Vehicles"
Ask the manufacturer about the device's suitability for other
applications.
Where a failure to observe instructions would
result in special danger, these instructions are
marked with the warning symbol shown here.
2. Delivery
1 Set of spindle support device =
1 Support with gear
1 Support without gear
1 Crank handle
1 Crank handle holder
1 Connection shaft
Model plate S 2000 Plus
S 2000 PLUS S/LA - 211001G
Hublast / Stütze:
12 t
Stat. Prüflast / Stütze: 25 t
Fabrik-Nr.
208376 A 0701
Production year
Production month
Foot type
Order No. of single support
– 10 –
Order No. for set
Max. load
Stat. test load