Inventum AKO6015ZWA Manuel D'utilisation page 30

INSTALLING THE APPLIANCE - OPTION 1
INSTALLING THE SCREWS
Preliminary requirements
• Plugs Ø 8 mm x 40 mm (2x)
• Screws Ø 4.5 mm x 50 mm (2x)
Procedure
1. Drill a hole at the marked positions. Use a Ø 8 mm drill.
2. Install the plugs (A).
3. Install the screws (B), but let them protrude 10 mm (C).
INSTALLING THE APPLIANCE
Preliminary requirements
• Screwdriver
Warning:
Two people are required to install the appliance.
Procedure
1. Put the appliance (A) on the screws.
2. Remove the grease filters.
3. Tighten the screws (B) to fasten the appliance to the wall. Use the screwdriver.
INSTALLING THE APPLIANCE - OPTION 2
Preliminary requirements
• Screws Ø 3.9 mm x 9.5 mm (4x)
• Screwdriver
Warning:
Two people are required to install the appliance.
Procedure
1. Remove the grease filters.
2. Place the appliance under the kitchen cabinet.
3. Fix the screws (A) to fasten the appliance to the cabinet. Use the screwdriver.
4. Place the grease filters.
30 • English
(Figure 7)
(Figure 8)
(Figure 9)