Lighting The Burners; Manual Lighting - Somagic TOM 735536i Notice De Montage

6 - Lighting the burners

Ensure that ALL the taps are closed (● position)
Open the gas canister tap
If your Barbecue has 1 Burner:
Turn the knob to maximum gas fl ow and press on the igniter.
If your Barbecue has 2 Burners:
Turn one of the knobs to maximum gas fl ow and press on the igniter.
If your Barbecue has 3 Burners:
To light the left-hand burner, turn the left-hand button to maximum gas fl ow and press on the
left-hand igniter.
To light the central burner, turn the central button to maximum gas fl ow and press on the left-
hand igniter.
To light the right-hand burner, turn the right-hand knob to maximum gas fl ow and press on the
right-hand igniter.
Press the piezo ignition to light the burner – if it doesn't light, press it a further 2 or 3 times.
In all cases, check that the burner or burners function while looking into the trough.
Your barbecue grill is equipped with a griddle. Take extra caution when
lighting.
Do not allow gas to accumulate under the griddle. This could be dangerous.
Never allow the gas to fl ow without the burner or burners being alight.
If lighting still does not work, wait for 5 minutes before recommencing the operation.
When starting up, never light ALL of the burners at the same time.
To turn off the burners, return ALL of the knobs to the ● position.
Any modifi cation to the equipment may be dangerous and is prohibited.
The tabs and the injectors may in no case be dismantled by persons not authorised by
the manufacturer.
Never place the gas bottle horizontally when in use.
The injectors are indicated reference 71. (stage A in the 12 assembly steps).
141
The airfl ow necessary for proper combustion is at least 18 m
144
The part (253) is an inter-igniter mechanism. If a tap is on, when you ignite the other, for your
safety the fi rst ignites automatically.
The part (253) is an inter-igniter mechanism. If a tap is on, when you ignite the other, for your safety
the fi rst ignites automatically.

7 - Manual lighting

In the event that the ignition does not work, it is possible to manually light the equipment.
To do so, light a match and hold it to the burner through one hole of the hearth
Open the control button corresponding to the burner.
The burner will light - remove the match to avoid the risk of burns (preferably use long, fi re
lighting matches)
3
per hour.
57/74 N TOM 735536i CE JJA 7L Maj 15.06.20