Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
4 / CARING FOR AND CLEANING YOUR APPLIANCE
CLEANING AND CARING OF THE
•
CASING
Avoid products containing abrasives when
cleaning the casing.
CHANGING THE LIGHT BULB
•
Warning
Before carrying out any work, the
power supply to the hood must be turned
off, either by unplugging it or by using the
circuit breaker switch.
If the halogen lamps need changing, slacken the
ring nut in an anticlockwise direction and remove
the bulb itself (fig.9). Replace with a bulb of the
same type.
CAUTION: Do not handle glass bulb with bare
hands.
In case the new halogen bulb does not light
up once it is on, disconnect the apparatus for
a few seconds.
HOW TO TAKE OFF THE GLASS
•
Warning
Before carrying out any work, the
power supply to the hood must be turned
off, either by unplugging it or by using the
circuit breaker switch.
To take off the glass, open the trolley pulling it
frontwards; pull the glass towards the left (or the
right) and lift one side upwards as it is indicated in
the figure 10.
All manuals and user guides at all-guides.com
27
fig. 9
fig. 10
Publicité
Chapitres
Table des Matières
