Troubleshooting - Panasonic WX-SA250P Mode D'emploi

Troubleshooting

Please check the common problems listed in this table before seeking professional
help.
If none of the tips provided here help, if you are dealing with a problem not listed here, or if
you are otherwise uncertain, contact your retailer for more information.
Phenomenon
The [POWER]
indicator stays off
The [POWER]
indicator lights red
The [POWER]
indicator blinks red
26
Cause/measure
⿟ Is the antenna being powered?
¨ Make sure that the antenna is connected to
¨
the receiver.
⿟ Has the antenna been newly connected after
powering ON the receiver?
¨ Power OFF the receiver before adding new
¨
antennas.
⿟ A communication error with the receiver has
occurred.
¨ Set the power switch on the receiver to OFF
¨
and then back to ON.
⿟ An antenna has been connected after powering
ON the receiver.
¨ Set the power switch on the receiver to OFF
¨
and then back to ON.
Reference
page
24
16
―
―