Ceiling Installation - Panasonic WX-SA250P Mode D'emploi

■ Ceiling installation

Unplug all cables from the antenna and follow these installation procedures.
1
Make an aperture on the ceiling panel
Open a circular aperture with diameter of 65 mm
(2-9/16 inches) on the ceiling panel.
2
Install the (included) ceiling mounting plate
A I nsert the two screws halfway (M4×35 mm, included) in the ceiling mounting plate, so
that they protrude from the bracket by 5 mm (3/16 inches) more than the thickness of
the ceiling.
Holes for the (included) screws on the ceiling mounting plate (two screws)
I nsert the screws in the correct mounting unit
holes according to the diameter of the
aperture in the ceiling.
Follow the diagram on the right.
B P lace the ceiling mounting plate (with two screws inserted halfway into the holes for
the 65 mm (2-9/16 inches) ceiling aperture) inside the ceiling.
Ceiling mounting plate
(included)
Important
Ceiling mounting screws
(included)
⿟ If the ceiling is thicker than 30 mm (1-3/16 inches), purchase and use
M4x40 mm screws.
Ø65 (2-9/16)
For a Ø65 mm
(2-9/16 inches)
aperture
For an already
present Ø120 mm
(4-3/4 inches)
aperture
Ceiling mounting plate
(included)
17