Publicité
Les langues disponibles
Les langues disponibles
•
Keep hands and fingers away from the path of
the sharp film cutter blade located at the film
exit.
Do not place the laminator on an unstable
cart, stand or table. An unstable surface may
cause the laminator to fall resulting in serious
bodily injury. Avoid quick stops, excessive
force and uneven floor surfaces when moving
the laminator on a cart or stand.
•
Do not defeat or remove electrical and
mechanical safety equipment such as
interlocks, shields and guards.
•
Do not insert objects unsuitable for
lamination.
•
Do not expose laminator to liquids.
Electrical Safeguards
•
The equipment should be connected to an
easily accessible and grounded (3-pin)
receptacle (socket outlet) near the
equipment.
•
This laminator must be connected to a supply
voltage corresponding to the electrical rating
as indicated on the serial plate located on the
rear of the machine.
•
Unplug the laminator before moving it, or
when it is not in use for an extended period
of time.
•
Do not operate the laminator with a damaged
power supply cord or plug.
•
Do not overload electrical outlets as this can
result in fire or shock.
•
Do not alter the attachment plug. This plug is
configured for the appropriate electrical
supply.
•
The unit is intended for indoor use only.
CAUTION: The receptacle must be
located near the equipment and easily
accessible. Do not use an extension cord.
•
Disconnect the attachment plug from the
receptacle to which it is connected and keep
the power supply cord in your possession
while moving the laminator.
•
Do not operate the laminator with a damaged
power supply cord or attachment plug, upon
occurrence of a malfunction, or after
laminator has been damaged. Contact an
authorized GBC service representative for
assistance.
This equipment is not suitable for use in
locations where children are likely to be
present
GBC Technical Service
To order replacement accessories, service, parts,
or an Equipment Maintenance Agreement, please
contact GBC Technical Service and Support at:
United States
ACCO Brands GBC Technical Service and Support
4 Corporate Drive Lake Zurich, IL 60047-8997
1-800-723-4000
www.gbcconnect.com
Canada
Ontario and Quebec – 1-800-268-3310
All other Provinces – 1-800-268-3447
Local 905-595-3100
Callcentre@GBCCanada.com
Mexico
Circuito de la industria norte
No. 6 corredor industrial
Toluca Lerma, Lerma, México
C.P. 52004 R.F.C. AME640229-1W3
En México llame al 01 800 759.6825
Desde el extranjero 52.72.2265.65.01
www.accomexico.com
Publicité
