Logic3 i-Station TimeCurve Mode D'emploi page 5

Selecting a source (iPhone/iPod, Radio or AUX)
1. Press the 'Power/Source' button.
2. Press the 'Power/Source' button again until you have selected your source
To adjust the Display dimmer level
1. Press the 'Snooze/Dimmer' button (when the alarm is not ringing), there are 3 levels of dimming.
Set Up of Line in
The i-Station TimeCurve also offers the ability to allow other portable audio devices such as iPod shuffle,
MP3, MiniDisc and Portable CD Players to be connected for use as a speaker system.
1. Connect a 3.5mm Audio-In cable (not included) into the headphone socket of your audio device and
to the 'Line IN' connection on the back of the unit.
2. Press the 'Power/Source' button to select the 'AUX' function. The 'AUX' symbol will appear on the
front display.
3. You can now use the WIS195 to play sound from your external audio devices.
NOTE: Remember to remove the line in cable when using the docking station as the line in cable will
override any sound coming from the docking station.
Hotel Mode
Press the 'Alarm' and the 'Volume Up Button simultaneously to toggle hotel mode operation.
Trouble Shooting
Problem
FM Radio not clear / Radio station not found
Alarm is not ringing daily
iPod/iPhone is not waking up as the Alarm
No Sound
What Should I do?
Re-position the antenna cable until the station sounds clearer
Ensure the 7 or 5 day alarm setting is active (see Setting of
Alarm)
Ensure the Alarm source is set to iPod/iPhone (see Setting of
Alarm)
Ensure the line in cable is not plugged into the rear of the
TimeCurve
Check Play status on the iPhone/iPod.
Please try updating the firmware for your iPhone/iPod using the
latest iTunes which is available from
www.apple.com/ipod/download