Logic3 i-Station TimeCurve Mode D'emploi page 3

Setting of Time/Date
1. Press and hold the 'Time'' button (Time will flash)
2. Using the 'Volume button' set the time format (24hr/12hr).
3. Press the 'Preset/Set' button (Hour Unit will Flash)
4. Using the 'Tuning' or 'Volume' buttons set the Hour.
5. Press the 'Preset/Set' button (Minutes Unit will Flash)
6. Using the 'Tuning' or 'Volume' buttons set the Minutes.
7. Press the 'Preset/Set' button (Year will flash)
8. Using the 'Tuning' or 'Volume' buttons set the Year.
9. Press the 'Preset/Set' button (Month will flash)
10. Using the 'Tuning' or 'Volume 'buttons set the Month.
11. Press the 'Preset/Set' button (Date will flash)
12. Using the 'Tuning' or 'Volume' buttons set the Date.
13. Press the 'Preset/Set' button (Day will flash)
14. Using the 'Tuning' or 'Volume' buttons set the Day.
15. Press the 'Preset/Set' button to save the settings.
Setting of Alarm
1. Press 'Alarm' button once, Volume and Source will flash on the display (if no buttons are pressed for
10seconds the display will return to the current time display).
2. Using the 'Volume' buttons set the volume level of the Alarm.
3. Press 'Alarm' button to set the Reccurence of the Alarm
OFF
7 Days (Everyday Alarm is active)
5 Days (Mon-Fri Alarm is active)
4. Press 'Power/Source' button to set the source you wish to wake up to
5. Press the 'Preset/Set' button (Hour Unit will Flash)
6. Using the 'Tuning' or 'Volume' buttons set the Hour.
7. Press the 'Preset/Set' button (Minutes Unit will Flash)
8. Using the 'Tuning' or 'Volume' buttons set the Minutes
9. Press the 'Preset/Set' button to save the settings.