Logic3 i-Station TimeCurve Mode D'emploi page 4

Setting of Sleep mode
The Sleep time can be adjusted to the user's preference.
1. In any source mode Press and hold the 'Alarm' button for 1second.
2. Sleep time will be displayed on the screen.
3. Using the 'Tuning' or 'Volume' buttons set the duration of the Sleep mode (OFF, 15, 30, 45, 60)
4. Once you have selected your Sleep time an
5. Display will automatically return to the current time display after 10 seconds.
6. The Sleep time will be counted down, to show the remaining Sleep time press and hold the 'Alarm'
button.
Setting the Radio
Only 6 Preset can be saved at any one time.
1. Un- tie the antenna cable and position the antenna as high up as possible.
2. Press and hold the 'Power/Source' button to turn on the Radio.
3. Select Radio by pressing the 'Power/Source' Button.
4. Using the 'Tuning' buttons set the required radio frequency (Pressing the 'Tuning' button once will
manually Tune the radio, Press and Hold the 'Tuning' button will Auto search the radio)
5. Press and hold the 'Preset/Set' button (Program number will then flash)
6. Using the 'Tuning' or 'Volume' buttons set the Program number you wish to save the radio station to.
7. Press the 'Preset/Set' button to save the settings.
To Recall a Preset Radio Station
1. Press the 'Preset/Set' Button and the Program number will appear on the display
2. Pressing the 'Preset/Set' button again will toggle through the Preset stations (P1, P2, P3, P4, P5, P6)
3. If no buttons are pressed for 10seconds the display will return to the current time display
Switching Off the Alarm/Snooze Function
1. Press the 'Snooze/Dimmer' button when the alarm is ringing, the alarm will be silenced for 5minutes.
2. To switch OFF the Alarm when the Alarm has gone off Press the 'Power/Source' button.
icon will be displayed on the top right of the display.