Omega VSJ843R Mode D'emploi page 11

HOW TO ASSEMBLE
1
* If the screen is not placed below
the groove, the hopper
!
will not lock in place.
The packing can be detached
and cleaned.
2
!
!
3
Auger
Wings
Spinning
Brush
Groove
4
!
5
.
Spinning
Brush Groove
!
!
Even if it is assembled
in opposite direction, it
is operable.
TIP
.
!
!
Assemble the screen. The top of the
screen must sit below the grooves on the
spinning brush, as shown in the picture.
Otherwise, the chamber set will not close
properly.
Place the assembled silicone brush and
screen into the juice bowl. Move it left to
right until it clicks into place.
Next place the auger inside the screen.
!
Align the augers wings with the grooves
on the spinning brush.
!
Place the hopper onto the juice bowl.
.
Turn the hopper clockwise until it is locked
completely.
Mount the assembled juice bowl
chamber onto the motor base.
!
!
!
.
.
!
.
.
9