PNI Safe House Smart Gas 300 WiFi Manuel Utilisateur page 8

• During maintenance work on the gas pipe, such as cleaning with pressure
the pipe, the solenoid valve must be removed to avoid damage.
• During pressure tests, the solenoid valve must be opened.
• It is recommended to install the solenoid valve together with the gas sensor
in the package.
Instructions for use solenoid valve
The solenoid valve can be operated for closing in two ways:
1. An electrical pulse of 1 second (9 - 12V)
2. By pressing the red button (you must first remove the protective plastic
cover).
After this operation, the solenoid valve remains closed.
Note: The protective cover must remain in place during the use of the solenoid valve,
because it has a protective role against accidental actuation.
To unlock the solenoid valve, meaning to allow the gas to flow, pull the red
button vertically upwards. The solenoid valve will remain open.
User manual 8