PNI Safe House Smart Gas 300 WiFi Manuel Utilisateur page 5

Remote control from the Tuya Smart application
Download the Tuya Smart app by accessing Google Play or the App Store or
scan the QR codes below:
• Open the application, create an account and log in.
Add your device by clicking the + icon in the upper right corner of the
•
screen or by clicking the Add device button (this button only appears when
you do not have any devices added to the application).
Select the Sensors option on the left side of the screen.
•
From the list of displayed devices, select Sensor (Wi-Fi).
•
• Select the WiFi network to which you want to connect the detector and
enter the password. Click Next.
• Using a needle, press the pairing button on the right side of the gas
detector for 5 seconds. The green light will flash. The detector is now in
pairing mode.
• Check the Confirm the indicator is blinking rapidly option.
• The application will start scanning the nearby devices.
• When your detector has been identified, the red LED will light up briefly,
after which the green LED will remain lit.
• Click the Done button to complete the addition of the gas detector to the
application.
Android
5
iOS
User manual