SilverCloud 2000VA Manuel Utilisateur page 4

Technical specifications:
Model
500VA
1000VA
1500VA
2000VA
All models are single phase.
Transfer time is under 0.5 seconds.
Waveform is sine wave, with no distortions.
Delay output time is between 6sec and 120sec.
High voltage protection is at 255V.
CAUTION!!!
Avoid overload.
ź
Do not use the AVR over the maximum output power.
ź
When connected to any device with built in motor compressor, the starting power is
ź
generally several times higher than the device working power.
Make sure the maximum output power it's not exceeded by the power of all electrical
ź
equipment connected.
For color TVs, consider twice its power.
ź
Make sure the AVR has the output voltage and frequency within your device
ź
requirements.
Make sure the input voltage source complies AVR requirements.
ź
ź Always use the AVR in an environment:
- well ventilated
- away from direct sunlight or other heat source
- out of reach from children
- away from water, moisture, oil or grease
- away from any inflammable substances
- secure and no risk of falling
The plug and output socket may look different,
ź
depending on the country of the user.
Input
Voltage Freq.
140V
to
50Hz 230V+/-10%
260V
Output
Voltage Freq.
1000VA
50Hz
1500VA
2000VA
3
Voltage
Max.
Protection
Power
Current
500VA 2.3A
4.5A
6.8A 10A
9.1A 12A
EN
High
3A
8A