Taurus Alpatec R500 Mode D'emploi page 10

COOL/HUMIDIFY FUNCTION:
- To activate this function, press the (D) button.
- To deactivate this function, follow the procedure
for switching it on in reverse.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance using the on/off switch (A).
- Unplug the appliance from the mains.
- Empty the water tank.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the upper part of
the body, which facilitates comfortable transpor-
tation.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Wash the filter in warm water with a mild, soapy
solution; use a soft brush if necessary. Rinse
with clean water and leave to dry.
- Wash the honeycomb filter with clean water and
a soft brush if necessary. Leave to dry.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
- At the end of the season, store the cleaned and
dried heater in the original packaging if possible.
Store it upright in a cool, dry and dust-free
place.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended; take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
The following information details the features
related to ecodesign.
R 500
Maximum flow rate of fan (F)
Power used by fan (P)
Service value (SV) (as per IEC
60879)
Power consumption in standby
mode (PSB)
Fan sound power level (LwA)
Maximum air velocity( c )
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU on
Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain
hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on
the ecodesign requirements for energy-related
products.
4,5 m /min
3
80,0 W
0,056 (m /
3
min)/W
0 W
65 dB(A)
8,5 m/seg