Publicité
M
x6
Fig. 4
4. Attach the Vertical Dividers (Ca) to the Center Shelf (Ea) with three #8x1⅝" Black Screws (M)
through the predrilled holes in the center shelf and into the pilot holes in the bottom edge of
the vertical divider. See Figure 4. Start all screws BEFORE FULLY TIGHTENING.
Fig. 5
Aa
5. Attach the Left Side Panel (Aa) to the Center Shelf (Ea) by sliding the Rafix Bolts (L) into the Rafix
Cams (K). Tighten the cams. Repeat and attach Right Side Panel (Ba) to the center shelf. See
Figure 5.
Ca
Ea
M
M
M
Ea
Ca
M
M
M
Ba
x6
Page 5 — 496Wa — 08/13
Publicité
