Hamilton Beach Commercial HIR600 Manuel D'utilisation page 6

840136500 ENv01.qxd 3/11/05
Fabric Setting Chart
Steam To Iron
Setting
Off
Nylon
Dry iron on the wrong side of the fabric.
Acrylic
Dry iron on the wrong side of the fabric.
Silk
Dry iron on the wrong side of the fabric.
Polyester
Iron with fabric still damp.
Rayon
Iron on the wrong side of fabric.
Wool
Steam iron on the wrong side of fabric.
Cotton
Iron while still damp using steam
and/or spray.
Linen
Iron on wrong side of fabric while still
damp.
9:40 AM Page 10
10
Caring for Your Iron
Iron
1. The Water Tank of your iron should be emptied after each
use. Turn Temperature Control Dial to OFF ( O ). Unplug
the iron and hold over a sink. Turn iron upside down until
Water Tank Opening is parallel with sink. Water will run out
of water tank opening.
2. After iron has completely cooled, store in an upright
position. Do not store iron laying flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, as
these may scratch the soleplate.
2. To clean occasional build-up on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3. Always store iron upright in the heel rest position.
11