Hamilton Beach Commercial HIR600 Manuel D'utilisation page 3

840136500 ENv01.qxd 3/11/05
Parts and Features
1. Retractable Cord*
2. Cord Release Button*
3. Spray and Blast Buttons
4. Adjustable Steam
5. Water Tank Fill Hole
6. Soleplate
7. Water Tank
8. Self-Clean Button
9. Power On Light (see inset)
10. Temperature Selector (see inset)
11.Heel Rest
9:40 AM Page 4
*on selected models only
4
Sensor Control
This iron is equipped with a position/motion sensor. This means
that if the iron is left motionless it will turn off automatically and
cool to room temperature.
To restart iron, simply move the iron and allow it to reheat on
heel position.
The iron will reheat to the previously selected setting.
The iron will lose memory when turned off ( O ) or unplugged.
Position Sensing
The iron will turn off automatically when left in the following
positions.
The auto off time varies based on the iron's position.
Iron Position
Resting on soleplate
Resting on either side
Resting on heel
Motion Sensing Information
The iron senses motion and will not shut off ( O ) as long as it
is in motion.
Motionless Time
30 seconds
30 seconds
10 minutes
5