Lenze DeviceNet E82ZAFVC001 Instructions De Montage page 43

Features of the data line
Insulation diameter
Conductor pair
Colours
Pair twist / m
Tape shield over conductor pair
Impedance
Propagation delay
Capacitance between conductors
Capacitance between a condcutor and the
conductor connected to the shield
Capacitive unbalance
Spec. DC resistor at 20°C
Attenuation
Features of the voltage line
Conductor pair
Insulation diameter
Colours
Pair twist / m
Tape shield over conductor pair
Spec. DC resistor at 20°C
EDK82ZAFVC001 DE/EN/FR 2.0
Electrical installation
1.96 mm (nominal)
Copper 24 min.; min. 19 cores (individually tinned)
Light−blue, white
Approx. 16
1000/1000, Al/Mylar, Al side out, w−shorting fold (pull−on applied)
120 Ohm +/− 10% (at 1 MHz)
4.46 ns/m (max.)
39.37 pF / m at 1 kHz (nominal)
78.74 pF / m at 1 kHz (nominal)
3.94 pF/1000 m at 1 kHz (max.)
91.86 Ohm/1000 m (max.)
0.95 dB/100 m at 125 kHz (max.)
1.64 dB/100 m at 500 kHz (max.)
2.30 dB/100 m at 1.00MHz (max.)
Copper 22 min.; min. 19 cores (individually tinned)
1.4 mm (nominal)
Red, black
Approx. 16
1000/1000, Al/Mylar, Al side out, w−shorting fold (pull−on applied)
57.41 Ohm/1000 m (max.)
l
4
43