x168_Basic.book 35 ページ 2003年4月9日 水曜日 午前11時2分
PLAYBACK ON A TV
Use the Video cable provided with the camera to play back recorded images
on your TV.
Both a still picture and a movie can be played back.
1
Make sure that the camera and the TV are turned off.
Connect the Video cable to the VIDEO OUT jack on the
camera and the video input terminal on the TV.
VIDEO OUT jack
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV's instruction
manual.
3
Press
.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
• You are recommended to use the optional AC adapter when using
the camera with a TV.
Note
• Make sure that the camera's video output signal type is the same as
the TV's video signal type.
Connect to the TV's video input
(yellow) terminal.
DC-IN jack/VIDEO OUT
jack cover
Video cable
En
En 35