Össur ICELOCK 544 Serie Notice D'utilisation page 5

ENGLISH
INTRODUCTION
Thank you for choosing a high quality component from Össur. We can
assure you that you have made the right choice. Please carefully review
and follow these instructions before fabricating the prosthesis or
accessory products. Remember to inform the patient concerning proper
handling and care of the prosthesis and its subcomponents, as set forth
in these instructions. This is important to achieve patient comfort and
maximum product life.
The users of Icelock 544 are clinical specialists and end user. This device
should only be used with a prescription from a physician that includes
the necessary treatment information.
INDICATION FOR USE
The Icelock 544 Series components are specifically designed to support
negative pressure suspension of prostheses to liners for Lower extremity
amputees. Weight Limit: 136 kg.
ISO
*) Body mass limit not to be exceeded!
For speci c conditions and limitations of use
see manufacturer's written instructions on
intended use!
CONTRAINDICATIONS FOR USE
Össur does not recommend prescribing Icelock 544 for amputees that
are not capable to use the device correctly according to instructions, for
example due to lack of hand dexterity or cognitive disability.
PRODUCT SELECTION AND FITTING
TYPE OF VALVE PLATE
Icelock 544 offers a number of different options regarding connectors,
check valve configurations and release buttons.
The following chart shows the different options available:
Check valve
to socket
Item (Sleeve only)
L-544511
L-544513
L-544521
L-544512 Yes
L-544541
L-544520 Yes
L-544540
- P - kg *)
Extended Air Release
Chamber button
Yes
Yes
Expulsion
port to air
(bypass)
Yes
Yes
Yes Yes
Yes
Yes
Integrated filter Barb connector
for pump to external Pump
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
5