• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in
accordance with manufacturer's instructions.
• Do not push objects into apparatus vents or slots
because fire or electric shock hazards could result.
• Maintain a minimum distance of at least 6 inches
around apparatus for sufficient ventilation.
• Ventilation should not be impeded by covering
the ventilation openings with items, such as
newspapers, table clothes, curtains, etc.
• No naked (open) flame sources, such as lighted
candles, should be placed on or near the
apparatus.
• Place apparatus in a stable location so it will not
fall causing product damage or bodily harm.
• Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized
plug. A polarized plug has two blades with one
wider than the other. The wide blade is provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
English
Important Safety InformatIon
CaUtIon
eLeCtrIC SHoCK HaZarD
• Operate the appartus only from the low level
audio line output jack of the computer or of an
audio device.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Unplug this apparatus during lightning storms or
when unused for long periods of time.
• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
• The apparatus shall be disconnected from the
mains by placing the power/standby switch in the
standby position and unplugging the power cord
of the speakers from the AC mains receptacle.
• The socket-outlet shall be installed near the
equipment and shall be easily accessible.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.