Publicité
Les langues disponibles
Les langues disponibles
7. Disposal
• For disposal, clean the tool and disassemble in accordance with the regulations for work safety and
environmental protection. Please recycle components.
8. Maintenance
• Always disconnect the tool from the compressed air supply prior to carrying out maintenance work.
• We recommend using benzine to clean the tool or its individual parts.
• Never clean with solvents or acids, esters (organic compounds comprising acids and alcohol),
acetone (ketone), chlorinated hydrocarbons or oils containing nitro hydrocarbons. Do not use any
chemicals with a low burning point.
Lubricating:
• Pneumatic tools have to be lubricated throughout their whole serviceable life.
• The motor and the ball bearings require compressed air to operate the tool. Since the moisture in the
compressed air corrodes the motor, the motor must be lubricated every day. We recommend that an
integrated lubricator is used to do this.
Important:
We recommend using air fi lters and a compressed air line lubricator.
Caution!
Disconnect the compressed air supply prior to lubricating,
connecting or disconnecting the tool.
9. EC Declaration of Conformity
Ensure that pneumatic tools are always used, inspected and maintained
in compliance with the respective local, state, national or federal regulations.
Product description:
Article No.:
We hereby confi rm that the designated product fulfi lls the regulation of
the new EC Machinery Directive 2006/42/EC.
For the evaluation of conformity, the following harmonized standards were consulted:
EN ISO 12100:2010
Person authorised to compile the technical fi le: Sandra Müller, Tel.: +49 (0) 2191 792 319
Person authorised to compile the technical fi le: Sandra Müller, Tel.: +49 (0) 2191 792 319
Date: 2020-09-29
Guido Schmidt
; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-400 • ^ hazet.de • ] export@hazet.de
12
Brake piston readjusting tool
4970 P-1/4
EN ISO 20643:2008 + A1:2012
HAZET-WERK Hermann Zerver GmbH & Co. KG
^ hazet.com • ] info@hazet.de
EN ISO 15744:2008
Publicité
