User Instruction; Connection; Disconnection; Maintenance - Nederman Single Exhaust Extractor Manuel D'instructions

6 User instruction
Recommended airflow:
• Cars: minimum of 400 m
• Trucks and buses: minimum of 1500 m
6.1 Connection
1 Open the station door and start the exhaust ex-
traction fan.
2 Drive the vehicle to the intended place.
3 Fit the nozzle on the exhaust pipe with the grip at-
tachment.
6.2 Disconnection
1 Open the station door and stop the exhaust ex-
traction fan.
2 Disconnect the nozzle from the vehicle. Hang up
the hose in the hose suspension.
3 Drive the vehicle out of the station.
The hose can withstand 150 °C (hose type NFC
300 °C) for continuous running. Use at high-
er temperatures will shorten the life of the
product. Therefore, avoid tasks that require
extended periods of continuous running which
will generate high exhaust temperatures.
7 Maintenance
In order to ensure that the system continues to oper-
ate correctly, the following should be checked once a
year or more often depending on the amount of use.
Defective and worn parts should be replaced immedi-
ately.
1 The nozzle's internal contact surface. Clean when
necessary.
2 The grip function in the nozzle.
3 The hoses.
4 Check the airflow (cars 400 m
3
1500 m /h) in the nozzle opening with an airflow
indicator. If required, check the fan impeller rota-
tion direction and/or damper function.
8 Spare Parts
CAUTION! Risk of equipment damage
Use only Nederman original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
Nederman for advice on technical service or
if you require help with spare parts. See also
www.nederman.com.
8.1 Ordering spare parts
When ordering spare parts always state the following:
Single Exhaust Extractor
3
/h
3
/h
3
/h, trucks/buses
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
www.nederman.com/en/service/spare-part-
search).
• Quantity of the parts required.
9 Recycling
The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or Nederman if uncertainties arise
when scrapping the product at the end of its service
life.
EN
7