realspace 7500109 Instructions Pour L'assemblage page 26

Voice Commands – Google Assistant
a. "Hey Google, set (device name) to 0%-100%"
b. "Hey Google, set (device name) level 1"
c. "Hey Google, set (device name) level 2"
d. "Hey Google, set (device name) level 3"
e. "Hey Google, set (device name) level 4"
* 0% is equivalent to 29.5 inches, 100% to 49.2 inches. Decimals will not work for % voice commands, please use
whole numbers only.
Additional voice commands below may be used but are not approved as available commands by Google.
f. "Hey Google, raise (device name) to 0%-100%"
g. "Hey Google, lower (device name) to 0%-100%"
h. "Hey Google, increase (device name) to 0%-100%"
I. "Hey Google, decrease (device name) to 0%-100%"
* 0% is equivalent to 29.5 inches, 100% to 49.2 inches. Decimals will not work for % voice commands, please use
whole numbers only.
Troubleshooting Voice Commands
Cannot control the devices with Alexa/Google voice control
- Check if there are any internet problems
- Check if you have enabled "Smart Life" in Alexa or Google app
- Check if you are using proper commands when talking to Alexa/Google Assistant, repeat your question, speak clearly
to Alexa/Google Assistant in English
- Check if you have modified the name of the Smart Desk in "Smart Life" app. If yes, you need to rediscover the devices
through Alexa/Google app.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
▪ Reorient or relocate the receiving antenna.
▪ Increase the separation between the equipment and receiver.
▪ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
▪ Consult the dealer or an experienced radio/TV technician for help.
Caution: Please note that changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment
26