Boot Sequence; Hard Disk Drive Passwords - Fujitsu LIFEBOOK AH532 Guide D'utilisation

N
EVER TURN OFF YOUR
DISPLAYED WHEN YOU TURN YOUR

Boot Sequence

The procedure for starting-up your notebook is termed the Bootup sequence and involves your notebook's BIOS. When
your LIFEBOOK notebook is first turned on, the main system memory is empty, and it needs to find instructions to
start up your notebook. This information is in the BIOS program. Each time you power up or restart your notebook, it
goes through a boot sequence which displays a Fujitsu logo until your operating system is found. During booting,
your notebook is performing a standard boot sequence including a Power On Self Test (POST). When the boot
sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the
operating system's opening screen.
The boot sequence is executed when:
• You turn on the power to your LIFEBOOK notebook.
• You restart your notebook from the Windows Shut Down dialog box.
• The software initiates a system restart. Example: When you install a new application.

Hard Disk Drive Passwords

To provide additional security for your data, you can assign passwords to your hard disk drive(s). This feature is
managed in the system BIOS Setup Utility. See
R
EMEMBER YOUR PASSWORDS
. Y
RESET IT OU MAY LOSE DATA AND HAVE TO REPLACE YOUR SYSTEM BOARD OR HARD DISK DRIVE
LIFEBOOK
NOTEBOOK DURING THE
LIFEBOOK
NOTEBOOK ON THE NEXT TIME
BIOS Setup Utility
. I
F YOU SET AND FORGET YOUR
37 - Starting Your LIFEBOOK Notebook
P O S T (POST)
OWER N ELF EST OR IT WILL CAUSE AN ERROR MESSAGE TO BE
.
See "Power On Self Test Messages" on page 76.
below for information about accessing the utility.
U M
SER AND ASTER HARD DISK PASSWORDS
, F A
UJITSU MERICA WILL NOT BE ABLE TO
.