MOBIKA CLIM Smart kit OSK102 Manuel D'utilisation page 43

Using iOS device to do network configuration
Make sure your mobile device has already been
1
connected to the Wireless network which you want to
use. Also, you need to forget other irrelevant Wireless
network in case it influences your configuration process.
Disconnect the power supply of AC(some units).
2
Connect the power supply of AC, and continuously
3
press the "LED DISPLAY" button or "DO NOT
DISTURB" button seven times in 10 seconds.
When the AC displays "AP" , it means that the AC
4
Wireless has already entered into "AP" Mode.
5 Press " + Add Device "
6 Select the appliance you
are setting up
11