Bond BLOOMINGTON Y95893 Guide D'utilisation page 8

ASSEMBLY INSTRUCTIONS
7. Cover the hole in the base of the fountain with
the reservoir lid (D).
8. cord plug
rate controller on the water pump to
the +/- signs. If the flow is not same for the two outlets,
adjust the knobs on the water flow rate control valve
assembly (C).
CAUTION:
Be careful not to spill water onto the plug of the pump.
DO NOT allow the pump to run dry!
9 . Adjust the feet under the fountain base (B) to make
it level. Place glass beads (F) onto the fountain base
evenly.
of power supply
y
8
D
Hole
Flow rate
C
adjusting
knob
F