Bond BLOOMINGTON Y95893 Guide D'utilisation page 6

ASSEMBLY INSTRUCTIONS
Remove all packaging from all parts.
1.
Connect the two long flexible hoses on the water
flow rate control valve assembly (C) to the inlets
on the bottom side of the top fountain (A).
2. Connect the short hose on the water flow rate
control valve assembly (C) to the outlet of the pump
(E).
3. Block the drain hole at the bottom of the fountain
base (B) with the silicone plug (AA).
NOTE : One silicone plug is needed for immediate
use in assembly, the other plug is provided as a
spare part.
6
A
C
C
E
B
AA