CARE AND MAINTENANCE
• If necessary, clean the fountain with a soft cloth and change the water frequently. Due to water
evaporation, you may see a buildup of white residue on the fountain surface from mineral content in
the water supply. To prevent such buildup, regularly clean the fountain with soap and water. Do not
use any abrasive, which may damage the applied finish.
• Use of water clarifier or algaecide of any kind will damage the paint on the fountain and will not be
covered under the manufacturer's warranty.
• Check regularly that the water reservoir has sufficient water to cover the pump at all times. It will be
necessary to check more frequently in warm or windy weather.
• Disconnect the power and empty the reservoir if the fountain will not be used for an extended time.
• If installed outdoors and in a freeze-prone area of the country, ensure all water is removed and
the unit is completely dry before temperatures drop too low. This product is NOT to be operated
below 41°F or freeze damage may occur.
• Store your product indoors during the winter months. Avoiding extreme cold temperatures
will prevent exposure damage.
• Keep this manual for future reference.
Pump housing
Model#
Description
YH-LV250C
Frequency
Flow Height
60 Hz
Suction cap
Volt.
Power
water
120 V
pump
18W
Flow Volume
780L/hour
190cm
Outlet
Water level controller
Rotor
Gland
NOTE: The pump data in this manual is from
lab tests. The actual pump may be different
due to the method of production or technical
improvements. This data can be used as a
reference when purchasing a similar pump.
10
Filter