Yarvik JOY PMP200 Manuel page 9

Repeat mode: Press the repeat icon "
starting point "A".
5. Press "NEXT" to con rm starting point "A".
Press the repeat icon "
"B".
6. Press "NEXT" to con rm ending point "B".
Repeat icon "A-B" xed. This starts repeat playback
between A and B, and it will exit after reaching the
set repeat time.
Press "PRE" to re-con rm starting point "A". (For
repeat times please refer to "Repeat times").
In Repeat mode, press "VOL+" or "VOL-" to set the
"Playback speed".
Playback-after-recording function (does not work with
pre-recorded les)
1. Enter the "A-B" repeat function.
2. Press "NEXT" to enter the playback-after-recording
mode.
3. When the repeat icon "
playback-after-recording icon "
record the user's voice. The time length is same as
the "A-B" repeat time.
4. When the repeat time is over, it begins to play the
recording. The icon changes to "
can press the "Next" button to enter the contrast
function.
Pressing the "PRE" button while in this function will
take you back to the "A-B" repeat mode.
Contrast function (does not work with pre-recorded
files)
1. Enter the contrast mode. The repeat icon is shown
as " ", and the original recording is played.
2. After the original track/song is nished, the icon
changes to "
In this function, pressing the "PRE" button takes
you back to the "Playback-after-recording" func-
tion.
In any of the three previous functions, pressing
the "M" button will exit the repeat mode.
• Repeat times (in the play
submenu)
For operation please refer to the "Backlight intensity
setting".
The A-B repeat time determines how many times
the music is repeated before exit.
• Repeat interval (in the play
submenu)
For operation please refer to the "Backlight intensity
setting".
The pause time (in seconds) between the rst play
and second play in repeat mode.
Playing movies
To play movies, you must convert the video to AMV
format. For additional instructions, please see "Playing
music".
Button functions
"PLAY": Play/Pause.
"M": Hold to return to the main menu.
"PRE/NEXT": Select Previous/Next les.
Hold for fast forward or reverse.
Record
Prior to recording please make sure that the PMP200
has enough power.
This player supports up to 99 recorded les in each
folder.
• Recording in the "Record mode"
1. There are two ways to enter the "Record mode":
In the main menu select "Record" and press the "M"
button to enter repeat mode.
2. Press the "Play" button to start and pause recording;
hold the "Play" button to save the recording.
The recorded le is saved in the currently
selected content: "Recording stopped submenu /
Main disk content".
If it shows "Capacity is full" it means no space is
left for saving the recorded les.
In this situation you must remove les to make
some free storage space.
If it shows "Content is full" means there are 99
les in this folder, please store your les in a
different folder.
• Recording type selection
1. Enter the recording interface.
2. Press the "M" button to enter the Record submenu.
3. Press "NEXT" to choose the "record style"
submenu, and press "M" to enter the menu.
4. Press the "M" button to choose the desired
recording format, and press the "M" button again to
con rm the choice.
The available recording formats are as follows:
Fine Record
" "B" to set ending point
" changes to the
", and the user's recording is played.
WAV format. Good
sound quality.
" "A" to set
", it begins to
"; then you