Yarvik JOY PMP200 Manuel page 10

Long Record
Fine VOR
Long VOR
5. Press the "Play" button to start recording.
Playback
Playing the recorded les:
1. Enter the main menu.
2. Press "Next" to choose "playback mode".3. Press
"M" to enter the playback mode interface.
4. Press "PLAY"again to start playback.
5. Select the recorded les:
"PRE": Select the previous recorded le.
"NEXT": Select the next recorded le.
Picture browsing
JPEG browser
• File selection function
After you enter the Picture menu, the following will
be shown:
JPG interface – File list – Selection le 01.jpg.
If there are no les here, the content will be empty.
Press "PLAY" to enter the picture display mode.
Press "NEXT" or "PRE" to choose the les.
Press "M" to enter the submenu. Select the les
as follows:
Local folder/Play set/Delete le/Delete all/Exit.
• Picture display mode
Enter the picture display mode. The following will
appear:
Press "NEXT" or "PRE" to display the next or the
previous picture.
Press "PLAY" to return to le selection mode.Hold "M"
to return to the main menu.
Other buttons are invalid in this mode.
System settings
1. Enter the main menu.
2. Press "NEXT" to choose the "system setting".
3. Press "M" to enter the submenus.
• List of all the parameters:
Clock
LCD set
Language
Power off
Replay
mode
Online mode
Memory info
Firmware
version
Firmware
upgrade
Exit
• Detailed operating instructions
A. Clock:
1. Press "M" to enter the system time interface.
2. Press "VOL" from year start setting. The year
number starts blinking.
3. Press "NEXT" or "PRE" button to adjust the time.
4. Press "M" button to con rm and exit after you have
made the necessary adjustment.
B. LCD setting
1. Brightness
adjustment
2. Black screen
mode (0-30)
3. Exit
Notes: "Brightness adjustment" adjusts the brightness of
ACT format. Average
sound quality.
WAV format. Recording
will stop when there is
no voice.
ACT format. Recording
will stop when there is
no voice.
Setting time and date
Setting backlight intensity
Setting different languages
Setting the player's off time and
sleep time
Setting replay mode: manual and
auto replay
Setting the location
Displays the remaining ash
memory capacity
Player's rmware version
Upgrade the player's rmware
Exit the current mode
Adjust the brightness of
the screen
Shuts off the screen when
the player has not been
used for a certain amount
of time (unit: second)