Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Functional description
AUTO mode:
Step
(change every 10
secounds)
S1
S2
S3
S4
Care and maintenance
WARNING!
Before cleaning or carrying out any maintenance on your vibration machine, ensure
the power is turned off and the power cord is removed from the plug socket.
Cleaning:
Clean your vibration machine with a damp cloth and mild detergent only, immediately
after use. Use a weak solution of anti-bacterial washing up liquid in warm water and a
microfiber cloth. Be sure to wring out the cloth so that it is just damp.
Storage:
Regularly check the cord/cable for damage before storing. Should the cord/cable be
damaged in any way it must ONLY be replaced by an identical cable of the same type and
specification. Never pull the cord/cable to disconnect from the power outlet. Always grasp
the plug and pull to disconnect. Remove the plug when not in use and store it.
Troubleshooting:
Error
No lights; does not respond to control panel or
remote control
Remote control does not work but the display is
working
Program (Intensity)
P1
P2
10
15
30
25
40
20
50
30
Error correction
- check if the machine is plugged in and
switched on
- check if the socket works with an alternative
electrical product
- point the remote control's transmitter directly
at the display's sensor
- replace the batteries (2x AAA)
１２
P3
P4
20
25
40
45
60
50
80
85
Publicité
Chapitres
Table des Matières
