Inficon D-TEK CO2 Mode D'emploi page 2

EU DECLARATION OF CONFORMITY
This declaration is issued under the sole responsibility of the manufacturer
INFICON. The object of the declaration is to certify that this equipment, designed
and manufactured by INFICON, is in conformity with the relevant Community
harmonization legislation. It has been constructed in accordance with good
engineering practice in safety matters in force in the Community and does not
endanger the safety of persons, domestic animals or property when properly
installed, maintained and used in applications for which it was made.
Equipment Description . . . . . . . . . D-TEK CO
Model Number . . . . . . . . . . . . . . . 716-202-Gxx (Applicable to all group numbers)
Applicable Directives . . . . . . . . . . 2014/35/EU (LVD)
Applicable Standards . . . . . . . . . . EN 61010-1:2010
CE Implementation Date . . . . . . . April 20, 2016
Manufacturer Representative
Brian King
INFICON
General Manager – Service Tools
Two Technology Place
East Syracuse, NY USA 13057
Any questions relative to this declaration or to the safety of INFICON products
should be directed, in writing, to the quality assurance department at the above
address.
®
INFICON and D-TEK
2014/30/EU (EMC)
2011/65/EU (RoHS)
2006/66/EC as amended by 2013/56/EU
(Battery Directive)
EN 61326-1:2013 (Class A)
EN 62133:2012 (CB Test Cert. FI-17925)
CISPR 11/EN 55011:2009 (+A1:2010)
EN 50581:2013 (Class A)
®
are trademarks of INFICON.
Leak Detector
2
EU Authorized Representative
INFICON GmbH
50968 Köln, Bonner Str. 498
2