Beta 1760/2TM Mode D'emploi page 6

OVERLOAD DISPLAY(1)
The digital display will indicate 1 when the input exceeds the measurement range selected.
If measuring above199.9°, change the resolution to 1°.
Be certain to seat the thermocouple connector properly and that the leads are not broken.
Hold Mode
Pressing the HOLD key to enter the Data Hold mode.
The "HOLD" annunciator is displayed. When HOLD mode is selected, the thermometer held the
present readings and stops all further measurements.
Pressing the HOLD key again cancels HOLD mode, causing the thermometer to resume taking
measurements.
Max Mode
Pressing the MAX key to enter the MAX mode. The thermometer then records and updates the
maximum values and the MAX annunciator appears on the display. Pressing the MAX key again
to exit the MAX recording mode.
In the MAX mode, press HOLD key to stop the recording press HOLD again to resume recording
Backlight Mode
Pressing the Backlight key to turn on the LCD backlighting function. Pressing the Backlight key
again to turn off the LCD backlighting function.
5