Beta 1760/2TM Mode D'emploi page 5

OPERATING INSTRUCTIONS
Selecting the Temperature Scale
Readings are displayed in either degrees Celsius (°C), degrees Fahrenheit (T).
When the thermometer is turned on it is set to the temperature scale that was in use when the
thermometer was last turned off. To change the temperature scale, press the for °C or °F key.
Single-Thermocouple Temperature Measurement
The thermometer displays the temperature of the thermocouple that is connected to the selected input.
Press the T2 key to display the temperature of the thermocouple connected to the T2 input.
Press the T1 key to display the temperature of the thermocouple connected to the T1 input.
The input selection cursor indicates which input is selected.
Differential Temperature Measurement
Differential temperature measurement is selected by pressing the T1-T2 key. This causes the
thermometer to display the temperature difference between the two thermocouples (the tempera-
ture of thermocouple T1 minus the temperature of thermocouple T2). The selection is indicated
by the input selection cursor.
Selecting the Display Resolution
The thermometer allows two choices of resolution:
High resolution: 0.1 "C or 0.1 °F
Low resolution: 1 °C or 1 °F
4