Philips Aleor 300 Mode D'emploi page 24

Handsets registering / unregistering (
4 handsets can be registered to the base station.A handset
can only be associated with 1 base station.
To register another handset, first enter registration
mode by unplugging and plugging back in the
power adapter to the electricity supply.
Once the menu is selected, enter the RC* code written under the
base and press
Warning : If you wish to associate another handset than a Aleor 300 to the
Aleor 300 base stations, make sure that these handsets are GAP compliant
otherwise it will not operate properly.
F To unregister the handset you use
F To unregister all the handsets (except the handset you are using)
Warning : Once unregistered, the handset is no longer operational.
Technical settings (country dependent)
To enter the following settings :
To scroll through the menus
Press to exit the programming option.
F Changing recall type (flash setting)
The use of some services accessed with
depend on the flash setting (Short/Long) according to your installation type (Public,
PABX).
or to choose between Short or Long
10
to confirm.
enter the RC code*
enter the RC code*
or
(call waiting, call forward...) will
)
*RC code
(Registration
Code) is
written under
the base.
: Short .
: Long.