Expert Mode - Atlantic DIVALI PREMIUM Notice D'utilisation Et D'installation

corp_U065-7474-B-DIVALI-VERRE-PREMIUM Page 51
To access the Expert menu, press the
enables you to access the appliance's advanced functions.
Enables you to get information about the appliance which you may be asked for if you contact the
After Sales department.
information
General
Function
config.
Parameters
Restrictions
Black

5 - Expert mode

and
Automatic Summer/Winter
Enables you to activate/deactivate the automatic change from
summer time to winter time.
Clock
By default, this configuration is active.
Date and time.
Lets you select the language: French, English, Spanish,
Language
German, Portuguese, Dutch.
Lets you return to the basic factory setting (PROG mode active,
setpoint at 19°C, lowering to 3.5°C, detection functions active).
Reset
The pairing between appliances, the connection to the app or
the connection to a command point will be removed.
Depending on your installation, you may note a different
temperature to the one displayed on your appliance. Before you
do anything, leave the temperature to stabilise for at least 6
hours at the required temperature in comfort mode. You may
then calibrate your appliance to adjust the setpoint temperature
T° calibration
to the temperature recorded in the room. The calibration value
is between -3°C and +3°C.
Example: the temperature displayed on your radiator is 20°C.
The temperature displayed on your thermometer is 22°C =>
select the calibration value +2°C.
In pairing, used to deactivate the open window function on this
appliance only. Deactivating the function on this appliance does
W i n d o w
not deactivate the function on the other paired appliances and
detection
enables it to follow the Open window detection function for the
other paired appliances.
Erasure Reserved for appliances managed by radio
Used to record a maximum setpoint temperature which may not
Max.
be exceeded. It is set by default to 28°C and ma be modified
temperature
(from 19°C to 28°C).
Used to lock the appliance's settings partially or completely.
Access control
Used to record a personal Expert Menu access code. Once
activated, the Expert Menu access is coded.
You may write
PIN code
your personal code here.
To deactivate it, go back to the Expert Menu, enter your personal
code and go back to Parameters --> Restrictions --> PIN code.
keys at the same time. This menu
Access Control
Authorised settings:
All
Temperature only
None (all locked)
51