Audio Pro LIVING LV22 Manuel D'utilisation page 6

ADJUST VOLUME SEPARATELY IN DIFFERENT ZONES
In order to be able to have the same music at different volumes in different rooms/areas, you can
divide each House Code into 3 different volume zones. Each zone can have a different volume. This
is very useful if, for example, you want to have one volume level in the living room and a somewhat
lower volume in the kitchen. You can have as many LIVING speakers in each zone as you want, or
just one pair. The zone volume can easily be controlled from the remote control unit.
HOUSE CODE 1
Speaker and transmitter set to
same House Code (channel).
Zone A
2 9 0 8
Zone volume
Living LV22 Living LV22 + LV-SUB FLAT
Note:
1. All the LV22 speakers are assigned to Zone A and have a volume level of 17 by default.
2. Each House Code (1, 2 and 3) can be split into up to 3 zones (A, B and C).
3. You can have as many speakers as you like on each House Code, and as many as you want in each zone.
A zone does not have to be just one room, but can, for example, be a whole floor in a house.
USING MULTIPLE TRANSMITTERS AND SPEAKERS
SIMULTANEOUSLY WITH HOUSE CODE 1, 2 OR 3
Transmitter: House Code 1
Speakers: House Code 1
Transmitter: House Code 3
Speakers: House Code 3
The House Codes (channels) can be used to share the wireless network between up to two sepa-
rate networks. This makes it possible to simultaneously play music from various audio sources from
two different transmitters on different pairs of LIVING speakers.
10
SOURCE
Zone B Zone C
1 5
Zone volume Zone volume
LV22 + LV33
PLAYING WIRELESSLY FROM OTHER AUDIO SOURCES
The TXD200 transmitter has a combined analogue/optical sound input. Any optical or analogue
device with audio output can be connected to the transmitter. Examples include computers, mp3-
players, iPod/iPhone/iPad docking stations, mobile telephones, stereo/receivers, CD players
and radios etc. The TXD200 contains an advanced Burr-Brown A/D converter for optimal sound
reproduction. The TXD200 transmitter must be powered by an Audio Pro USB power adaptor if con-
nected by cable (sold separately).
To 230V
AC outlet
Optical or
analogue cable
PLAYING WIRELESSLY FROM A SMARTPHONE/TABLET
In order to play from handheld devices, connect an AirPort® Express unit or Bluetooth® receiver
unit to your Audio Pro transmitter. Set up the AirPlay® or Bluetooth® device according to the rel-
evant user manual.
Connect the device to the
TXD200 or the LV-HUB
using a cable
11