Left Hand Handlebar Switch - SWH SM 500 R E4 2018 Guide Rapide

LEFT HAND HANDLEBAR SWITCH

The left hand handlebar switch contains the follow-
ing commands:
Headlamp (A)
1) High beam flasher (automatic turn-off)
2) High beam switch
Low beam switch
Indicators (turning signals) (B), (C)
3) Left turn indicator (automatic return)
Right turn indicator (automatic return)
To deactivate the indicators, press the control level
after it has returned to centre.
4) Horn
5) Rear wheel ABS exclusion selector
- The ABS function on the rear wheel can be deac-
tivated for circuit riding.
NOTE
In order to activate or deactivate the ABS func-
tion on the rear wheel, the motorcycle must be
stationary.
Rear wheel ABS deactivation
- To deactivate the ABS function on the rear wheel,
move the selector (5) towards "
there for 3 seconds; the " ABS " indicator light on
the digital instrument will begin flashing.
EN - 10
5
4
" and hold it
B
1
2
- To reactivate the ABS function, move the selec-
NOTE
Each time the ignition key is moved from the "OFF"
position to the "ON" position, the ABS system will be
3
automatically reactivated.
IMPORTANT NOTE IN CASE OF COLD START AT
A LOW TEMPERATURES
It is recommended to briefly warm-up the engine
at idle until there is a normal response from the
engine when opening the throttle.
In this way, the oil can reach all the surface
requiring lubrication and the coolant can reach the
temperature required for correct engine function.
Avoid warming up the engine for an excessive
B
period of time.
C
Rear wheel ABS activation
tor to " " for at least one second; the "
" indicator light on the digital instrument will turn
off.
C
ABS