Preliminary Controls - SWH SM 500 R E4 2018 Guide Rapide

PRELIMINARY CONTROLS

A. Engine-transmission oil level
Keeping the motorbike level and upright, check the
oil level through the inspection (1) window on the
right crankcase. Make sure the level is in between
the MIN and MAX notches.
To fill up, remove the filler cap (2).
1
2
EN - 6
B. Fuel level
Check the level in the tank, top up as needed.
MAX
C. Coolant level
MIN
Check level (1) in right-hand radiator when engine is
cold (place the motorbike fully upright). The coolant
The coolant must always be present in the expan-
sion tank (2); its level must always be above the MIN
mark indicated in the figure.
If that is not the case, top up through the cap (4).
The radiator cap (3) is provided with two locking
positions: the first one is for prior discharge of pres-
sure in the cooling system.
WARNING:
Avoid removing radiator cap when engine
is hot, as coolant may spout out and cause
scalding.
D. Brake fluid level
1
MIN
2
4
3