14. Reinstall door screws
Install 6 hinge screws and the other 4 screws.
15. Install hinge covers and plugs
Hinge covers will go in sideways. Then rotate 90° and snap into
place.
Troubleshooting
See your Owner's Manual or visit our website and reference Frequently Asked Questions to possibly avoid the cost of a service call.
16. Hang door
Hang door by placing set pin in dryer cabinet hole and slide door
®
down. Using a T25
screwdriver, install (A) screws and then (B)
screws. Tighten all hinge screws.
3