6. Instructions for use
•
Remove the source of odour such as cigarette butts, ash, biological waste, etc.
•
Take away or tightly seal aromatic foods, perfumes and detergents
•
If you also want to carry out deodorization and disinfection of things that are in cabinets or in drawers
of tables, then open drawers and doors of cabinets
•
Turn off the external ventilation or ventilation hood
•
Do not use aromatic polishes and detergents immediately before application
•
All surfaces in the room should be dry
•
Place the device on a stable support, preferably in the centre of the room, so that the air flow is not
limited by any obstacle
•
Ensure that children and pets do not have access to the room, remove all plants from the room as well
•
Do not expose the device to increased humidity, prevent liquids from getting into the device
•
Do not use the device in the presence of chemicals that could release corrosive or explosive fumes
•
Do not cover the air intake and outlet openings, do not place any objects on the device
•
Never use damaged or dirty equipment
•
Remove objects containing rubber parts – prolonged applications of ozone and its high concentrations
can damage rubber and some plastics
•
The power supply of the device generates a high voltage; opening the instrument case while operating
under voltage may result in electric shock
•
If you need any service or repair, contact the manufacturer or its Authorized Service Centre
For particularly polluted areas, the treatment should be repeated 2-4 times for 2 hours of ozone production.
In these cases, it is better to use the operation of the device in a long-term mode. It may happen that after
the first application of active oxygen, the space appears odourless. After a while the smell appears again. This
problem is common in more heavily contaminated rooms. It is a common problem in a more heavily contam-
inated rooms. After the first application, only deodorization of the air and surfaces of objects is achieved. After
the end of the application, substances that cause odour could emanate from the pores of walls, furniture
and textiles fibres. The content of odorous substances in the pores decreases after each application. For this
reason, it is necessary to repeat the process several times.
Common mistakes:
•
electric power failure or shutdown during operation of the device
•
placing the device in front of an obstacle, which impedes the flow of air
•
leaving the room air conditioner on
•
choosing too short ozone production time
18 / 36 LIFETECH s.r.o.