Télécharger Imprimer la page

Ebode IR Link Mini PM18 Guide Utilisateur page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
your original remote control at the sensor on the front side of the IR receiver, and choose a
few channels, for example. When the A/V equipment does not respond, it may be so that
the IR LED has not been attached at the right position. In case of some devices, the
positioning is critical. You can use the second IR LED to operate a second A/V device. Never
remove the IR LED, even if you don't use it!
7. FREQUENTLY ASKED QUESTIONS
I can't operate the A/V equipment via the PM18 IR LINK MINI.
Consider the following instructions:
• Use strictly new (full) non-rechargeable alkaline AAA type batteries for your IR receiver.
• Check if the light of the IR receiver lights up when you use the remote control.
• Is your IR transmitter within the range of your A/V equipment?
• Shifting the IR receiver or the IR transmitter often solves the problem.
Even 30 cm to the left or to the right can make much difference.
• Change the position of the antenna wire [G], experiment with it for the best result.
• The IR Receiver does not work together with some A/V apparatus and models
which use a higher IR frequency like for instance Bang&Olufsen (B&O) .
I'm having problems operating the A/V equipment in combination with
the optional IR Eye:
Consider the following instructions:
• Do the IR LEDs light up when you press a button of the remote control?
• Is the IR Eye correctly connected to the IR transmitter?
• Is the IR LED correctly attached to the IR window of your A/V equipment?
Is it possible to use several IR receivers with each other?
Yes, they will all send signals to the IR transmitter.
Is it possible to use several IR transmitters with each other?
Yes, however, the IR transmitters will all transmit the same IR signal, which is
received by the IR receiver.
8. TECHNICAL DATA
IR TRANSMITTER
Range: Up to 100m free field, up to 30m through wall or ceiling
Power: 230VAC/50Hz, 9VDC 100mA.
Frequency: 433.92 MHz.
Dimensions: 52x29x54 mm.
IR RECEIVER
Power: 2 x AAA 1.5V non-rechargeable alkaline batteries (supplied).
Frequency: 433.92 MHz.
Dimensions: 52x29x54mm
Specifications may change without prior notice.
16-8-2010
4
033000H14719A

Publicité

loading