Black & Decker ICL500 Guide D'utilisation Et D'entretien page 6

4. Turn the dial to the desired setting.
5. Move the steam control lever to the desired setting.
Recommended settings:
SETTING GUIDE
For best results, it's recommended to use the manufacturer's garment tags
for heat and steam instructions. When in doubt, always start at the low
heat setting.
Setting name and Icon
Low steam
High steam
ADDITIONAL FEATURES
SPRAY MIST BUTTON
Water spotting affects some fabrics. Test this out first on
a hidden part of the fabric.
1. Lift the iron off the fabric.
2. Aim the spray nozzle at the fabric.
3. Press the button – you may have to press it 2 or 3
times to pump water through the system. (B)
STEAM BURST BUTTON
1. Steam is available when the temperature control is
at or above.
2. Press the
3. Leave 4 seconds between shots, to let the temperature
build up.
DRY IRONING (IRONING WITHOUT STEAM)
1. If you're going to be dry ironing for 20 minutes or more,
empty the reservoir first to avoid spontaneous bursts of steam.
2. Set the steam control to
3. Set the desired temperature.
4. When the smart status light flashes green, your iron is ready to use.
No steam
button. (C)
.
Fabrics
synthetics, nylon, silk, polyester
wool, cotton, linen
6
blends
B
C