Installation Instruction
Please Read the Manual carefully Before
Installation
GB
Please Note
Electrical connection
The oven is fitted with a plug and must be only connected
to a properly installed earthed socket. In accordance
with the appropriate regulations, the socket must only be
installed and the connecting cable must only be replaced
by a qualified electrician.
If the plug is no longer accessible following installation
and all-pole isolating switch must be present on the
installation side with a contact gap at least 3mm.
The fitted cabinet must not have a back wall behind the
appliance.
Minimum installation ventilation slots and suction holes.
Note:
Do not trap or bend the power cable.
a. Built-in furniture
116