Troubleshooting; Security Advices - Caso Germany SJW 400 Manuel D'instructions D'origine

Please note
► Thoroughly dry the bottom of the juicing screw where it connects to the metal cylinder
shaft on the base.
6. Place the juicing bowl under running water and unplug the compression silicone to
clean the pulp spout.
7. Do not clean the main machine. Only wipe it with a damp cloth.
Tip:
• Soak the juicing bowl in a solution of warm water with baking soda or little bit of bleach
to clean the excess build up.
Warning
► Do not use any hazardous chemicals to clean the appliance. It may change the color of
the appliance or result in a fire.
8. After cleaning, use a dry cloth to dry the appliance. Mount it and store it at a dry, safe
place.

17 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

17.1 Security advices

Attention
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
17.2 Troubleshooting
Problem
The device does not start.
The amount of juice is very little and
residues are still damp.
Caso Entsafter „Whole Slow Juicer" SJW 400
Solution
• Please check whether the power plug is properly
plugged.
• Please check whether the assembly is done
according to assembly methods.
• Check whether stale food is used.
• Food that was stored in the refrigerator for a long
time must be soaked in clear water for at least 10
minutes before using them.
• Different ingredients hold different amounts of
fluid that will yield different amounts of juice.
• Check if the compression silicone is firmly
inserted.
43