Assembling; Performances; Rating Plate - Caso Germany SJW 400 Manuel D'instructions D'origine

14.2 Assembling

1. Place base on the table.
2. Firmly insert the compression silicone into the slot below the pulp spout underneath the
juicing bowl.
Please note
► The juicer may leak if not assembled properly.
► Juicer will not operate if parts are not assembled properly.
3. Place the bowl on the base so that its grey arrow lines up with the black arrow on the
base.
4. Assemble the strainer into the rotation wiper then place this assembly into the juicing
bowl ensuring the red dot on the strainer is aligned with the red dot on the juicing bowl.
5. Place the juicing screw into the strainer. Turn and press down on it until it clicks into
place.
Please note
► The juicing screw needs to be locked in place in order to close the drum lid.
6. Place the feeding tube on the juicing bowl aligning the red dot on the drum lid with the
red dot on the juicing bowl. Turn clockwise to close.
Please note
► For easy assembly hold the drum lid by grabbing the feeding tube and turn clockwise as
shown in the illustration.
7. Place the pulp cup under the pulp spout and place the juice cup under the juice spout.

14.3 Performances

Experience the best quality juice by understanding each ingredient's characteristics and
knowing the optimal way of handling the ingredients. The Whole Slow Juicer is an
innovative product that uses a patented slow-speed masticating technology to efficiently
extract the juice from ingredients.
The juice is designed to obtain the best result from ingredients with firm composition and
with high water content. For best result, each ingredient should be prepared and extracted
depending on its characteristics and properties.

14.4 Rating plate

The rating plate with the connection and performance data can be found beneath the
device.
Caso „Whole Slow Juicer" SJW 400 37