DELTACALOR FLAG Notice D'utilisation Et D'installation page 37

"User" programs from U1 to U4
The product has 4 weekly programs that can be edited by the user:
• Briefly push the
• Hold down (>2 seconds) the
NOTE - The predefined settings for programs U1, U2, U3, U4 are the same as for Eco type use
throughout the week.
Description of the pictograms used for editing a user program
The comfort temperature
applied to the half hour selected.
Description of editing a user program
• Programming proceeds in increments of 30 minutes.
• Editing of a program begins on the first day of the week (1 = Monday).
• The key activates the ECO temperature, according to the cursor.
• The key activates the Comfort temperature, according to the cursor.
• The key is used to move the flashing cursor to the right.
• The key is used to confirm editing of the day.
When confirming editing of the day, both via the key
time interval, the following screen is displayed:
This means that, if they so wish the user may copy the program to the next day. Push the
keys to select "YES" or "NO" to confirm copying or not.
key to activate the user program, selected using mode
key to edit the program selected.
is The ECO temperature
to the half hour selected.
and via the
[ 37 ]
.
is applied
or after defining the last
or